Technical details

1) Wide graphic display
White backlight for optimum readability.

2) Ribbon holder
Simple, centered insertion of the ribbon with three-part tightening axles.

3) Simple adjustment
The print head is pressed down by toggles. One is mounted to the left label margin, the other is pushed to the right label margin.

4) Anti-static brush
Particularly in case of plastic materials electrostatics is discharged after printing.

5) Peripheral connection
All add-on modules are easy to connect. All peripheral devices are plugged in the printer using two pins and are fixed in place with a screw.

6) Solid metal chassis
Die-cast aluminium. All components are mounted on it.

7) Roll holder
For labels up to a diameter of 300 mm. Swing lever and integrated brake make sure that the labels are unwound with constant tension.

8) Ribbon saver for printhead 1
The ribbon saver is used for labels to be partially printed. The print head is lifted within the unprinted area and the ribbon stopped during label feeding.

9) Fanfold guide
Fanfolded labels are positioned behind the print unit. Guide and additional brake ensure a reliable feeding to the print unit.

 Overview technical data A+ and X series (PDF)

Standard     Optionally

Label printer	XC4	XC6
Print head
Print method thermal transfer
Print method thermal direct	–	–
Printable resolution dpi	300	300
Print speed up to mm/s	125	125
Print width up to mm	105,6	162,6
Material	Paper, cardboard, textile, plastics
Labels or continuous materials on rolls or fanfold	1)	1)
Material thickness mm / weight g/m2	0.05-0.2 / 60-180
Width: labels2)  mm	20-116	46-176
liner mm	24-120	50-180
Height2)  without back-feed from mm	20	20
Height 1) up to mm	2,000	1,500
Media roll outside diameter up to mm	300	300
Media roll: core diameter mm	76	76
Media roll: winding	Outer or inner
Ribbon
Ink side	Outer or inner
Roll diameter up to mm	72	72
Core diameter mm	25	25
Variable length up to m	360	360
Width3)  up to mm	114	165
Dimensions and weights
Height mm	395	395
Depth mm	554	554
Width mm	248	358
Weight kg	22	24
Label sensor
Gap sensor	For leading edge or punch marks and end of material
Reflective sensor from bottom/optionally from top	For print marks
Distance to locating edge mm	5-53	5-53
Electronics
Processor 32 bit clock rate MHz	266
Main storage (RAM) MB	64
IFFS printer memory MB Flash	8
Plug-in Compact Flash Type I
Plug-in WLAN card
Battery buffer for real-time clock
Acoustic error signal
Interfaces
Centronics according to IEEE 1284	–
RS232 C	–
USB 2.0 hi-speed slave for PC
Ethernet 10/100 Base T, LPD-, RawIP-, FTP-Printing, DHCP, HTTP, SMTP, SNMP, TIME, Zeroconf, mDNS, SOAP
RS422/RS485	–
Peripheral connection
WLAN 802.11b/g WEP/WPA PSK-(TKIP)
2xUSB hosts for external operation panel, keyboard, scanner, service key, USB stick
Operating data
Power supply	100-240 V ~ 50/60 Hz, PFC
Power consumption W	100-300 depending on type of printer
Temperature/humidity operation	5-40°C/10-85% not condensing
Temperature/humidity: stock	0-60°C/20-80% not condensing
Temperature/humidity: transport	–25-60°C/20-80% not condensing
Approvals	CE, FCC class A, CB, CCC, UL

 For more technical data please read the product brochure (PDF)

1. Continuous materials on rolls only after being tested.
2. Limitations may apply to small labels, thin materials or strong adhesives. These applications need to be tested and approved.
3. Ribbon according to label width in order to avoid folding.