Technical details
Differences compared to a left-aligned material guide

1) Ribbon holder
Easy insertion of the ribbons is enabled with the three-part tightening axles. A pre-printed ruler simplifies the adjustment.

2) Roll holder
When setting the margin stop, the material roll is automatically centered. If rolls with 100 mm core diameter are processed, an adaptor is recommended.

3) Plungers
Both plungers are fixed for all material widths. No print head settings or adjustments are necessary.

4) Material guide
The material guide just in front of the print roller provides accurate imprint. The material width is adjusted with a spindle.

5) Print rollers coating
Synthetic rubber is standard for accurate imprint; silicone is available as an option for an extra long service life at a higher imprint tolerance.

6) Slim print rollers
To achieve accurate imprint with slim materials and ribbons slim print rollers are needed. These prevent from print roller wear, print head contamination and errors during material feed.

Coating: synthetic rubber

Typical    Possible   Standard     Option

	1.4
Label printer	SQUIX 4.3 M		SQUIX 4 M
Material feed	centered
Printing method: Thermal transfer
Printing method: Thermal direct				–
Printable resolution dpi	203	300	300	600
Print speed up to mm/s	250	250	300	150
Print width up to mm	104	108.4	105.7	105.7
Print start: Distance to locating edge	centered
Material
Roll, fanfold, reel: Paper, cardboard, PET, PE, PP, PI, PVC, acrylate, Tyvec
Roll, fanfold, reel: Smart Labels
Roll, fanfold, reel: Ready-for-use shrink tubes
Roll, fanfold, reel: Pressed continuous shrink tubes
Roll, fanfold, reel: Textile tapes
Labels1) Width mm	4 – 110
Labels     Height without label backfeed2) from mm	3
Labels     Height with label backfeed2) from mm	4
Labels     Height with label backfeed when dispensing from mm	6
Labels Maximum height mm	2,000
Labels     Thickness mm	0.03 – 0.60
Carrier material Width mm	9  – 114
Carrier material Thickness mm	0.03 – 0.16
Continuous material Width mm	9  – 114
Continuous material Thickness mm	0.05 – 0.50
Continuous material Weight (cardboard) up to g/m2	300
Shrink tubes Width ready-for-use up to mm	114
Shrink tubes Width continuous mm	4 – 85
Shrink tubes Thickness up to mm	1.1
Roll, reel: Outside diameter with core diameter up to mm	205 / 38.1 – 76 180 / 100
Winding	outside or inside
Ribbon3)
Ink side	outside or inside
Roll diameter up to mm	80
Core diameter mm	25.4
Variable length up to m	450
Width mm	25-114
Internal rewinder in peel-off version
Outside diameter up to mm	142
Core diameter mm	38.1 – 40
Winding	outside
Printer sizes and weights
Width x Height x Depth mm	252 x 288 x 460
Weight kg	10
Label sensor with position indication
Gap sensor for	labels, punch marks or print marks in transparent materials and end of material
Reflective sensor from below or top for	print marks in not transparent materials and end of material
Distance sensor from center to locating edge centered mm	0-55
Height of material gap mm	2
Electronics
Processor 32 bit clock rate	800
Main storage (RAM)	256
Data storage (IFFS) MB	50
Slot for SD memory card (SDHC, SDXC) up to GB	512
Battery for time and date, real-time clock
Data storage when power is off (e.g. serial numbers)
USB WLAN stick 2.4 GHz 802.11b/g/n	(included as an extra item in the scope of delivery)
Interfaces
RS232C 1,200 to 230,400 baud/8 bit
USB 2.0 Hi-speed device to connect a PC
Ethernet 10/100 BASE-T	LPD, IPv4, RawIP printing, DHCP, HTTP, FTP, SMTP, SNMP, TIME, NTP, Zeroconf, SOAP web service, VNC
1 x USB host at the operation panel for 1 x USB host at the operation panel for	Service Key or USB memory stick USB WLAN stick 2.4 GHz 802.11b/g/n
2 x USB host on the back side for	Service Key, USB memory stick, keyboard, barcode scanner, USB Bluetooth adaptor, USB WLAN stick
WLAN 802.11b/g/n, hotspot or infrastructure mode GHz	2.4 / 5
Periphery connection USB host, 24 VDC
Digital I/O with 8 inputs and outputs: Peel-off/basic device	/
Operating data
Power supply	100 – 240 VAC ~ 50/60 Hz, PFC
Power consumption	Standby <10 W / typical 150 W / maximum 300 W
Temperature / humidity: Operation	+5 – 40°C / 10 – 85% not condensing
Temperature / humidity: Storage	0 – 60°C / 20 – 85% not condensing
Temperature / humidity: Transport	–25 – 60°C / 20 – 85% not condensing
Approvals	CE, FCC class A, CB, CCC, cUL

  Technical data SQUIX  with SQUIX M and SQUIX MP by comparison (PDF)

1. Limitations may apply to small labels, thin materials or strong adhesives. Critical applications need to be tested.
2. When tearing off, cutting, rewinding.
3. The ribbon should at least correspond with the width of the carrier material.