Duraflex White

FACESTOCK

2.0 mil white gloss print receptive polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures.
Print receptive film is printable via resin and wax/resin thermal transfer; UV and Solvent Screen; UV; solvent and water flexo.
Thickness Film: 2.0(51)+/- 10%
Thickness Adhesive: 0.85-0.95(21-24)+/-0.1(3)
Thickness Liner: 2.3(58)+/-10%

ADHESIVE

Permanent acrylic pressure sensitive adhesive with chemical resistance and strong adhesion to both high surface energy substrates as well as many low surface energy plastics.
Acrylic 94 Oz/In 1114N/m
Glass 77 Oz/In 979N/m
Polypropylene 22 Oz/In 242N/m
Stainless Steel 75 Oz/In 924N/m

LINER

Universally accepted 40lb. white glassine roll form liner for typical roll label die cutting.

PERFORMANCE DATA

Service Temperature Rage: -40°C to 150°
Min Application Temperature: 10°C

APPLICATION OF USE

When applying pressure sensitive adhesive it is necessary to provide pressure during lamination. Starting at the top peel back a 1” section of the release liner, align and apply. Using a plastic squeegee, stiff cardboard or a soft cloth will help provide the necessary pressure at the point of lamination. Continue removing the release liner and smooth out with squeegee. Heat can increase bond strength when bonding to metal parts. For plastic parts, the bond strength is not enhanced with the addition of heat.
For best results, the application surface and the surrounding ambient atmosphere should be 10°C or above. If applying the adhesive below 10°, the application surface should be cleaned with isopropyl alcohol to ensure good initial adhesion.

CONVERSION PRINTING

Thermal transfer printing is tested ISO15416 for barcode print quality and ASTM F1319-94(2005) for abrasion resistance with a variety of resin and wax/resin combo ribbons.

SHELF LIFE

Two Years when stored at 21° and 50% RH.

STATEMENT OF PRACTICAL USE

RoHS 211/65EU Annex 11 compliant with respect to Cadmium, Lead Mercury, CR(VI), PBB’s and PBDEs. Testing to IEC 62321 standards found none of the above hazardous substances of concern within the method detection limit. Full report available on request.

All the Lorem Ipsum generators on the Internet tend to repeat predefined chunks as necessary, making this the first true generator on the Internet.but the majority have suffered alteration in some form